Quote:
Originally Posted by Pontitruck
Nova, my harness is from BP so there are no plugs for the NSS. II have the older two plug NSS so I’m buying the 7 pin pigtail to do the wiring for the pcm. I’m assuming I can just seal up the 4 wire area with silicone correct?
Thanks
Posted via Mobile Device
|
Yes, you should only need wires in the big connector for the back up lights and neutral safety portions of the switch. I suppose you could silicone the other area, but if it were me, I would just get the plug for it if you are getting the other plug at the junk yard or something. I may even have an extra one lying around, but I would have to check....