[CO71Blazer]

Sorry for the crappy pics. I basically cut some 3/16" 2" wide flat stock to 20" long. That gave me more than enough to work with width wise. I measured my holes, lined everything up and welded the flat stock to the feet. I misaligned the flat stock when I welded but it was nothing a few passes with a round file couldn't fix. Passenger side was the same. Bolted them down to the stock mounting holes and so far it's solid as a rock and way better than the mid 70s seats that were in there.

Edit: of course they are sideways... I'm on my phone. I'll fix them when I get home.