[Castle09]

Well I don’t know how strong 💪🏼 you are lol but this is how I did it by myself. I first built some low to the ground wood frames and casters. Lifted one side of the cab (did the box the same exact way) and slid the wood frame under one side. I used a jack and a long wooden 4x4 to lift the opposite side. I don’t have any suspension on my frame so I was able to drop the frame to the ground and slide it out. Then I lifted the side that’s supported by the wood frame up and push the WF towards the side supported by the jack and 4x4. That’s it, a little shimmy and done. I have a few pictures of the process on my IG C10_Steve if you wanna see. Hope you understand my gibberish 😂😂