Quote:
Originally Posted by e015475
go to ebay and use this search string
'hydroboost JIC'
All the fittings needed for your hydroboost
Phil
|
Hey phil. Ordered the fittings already - think you were the one that got me going down the JIC route.
2 x Russell 648080 PWR STEERING ADAPTER - 18mm/6AN/JIC 1.5mm oring
3 x Russell 648080 PWR STEERING ADAPTER - 16mm/6AN/JIC 1.5mm oring
More for ordering the high pressure hoses (Custom - get length correct ). Im 95% sure that they each connect to a 16mm and an 18mm and route like nelow
eg
**HIGH**
1) 16mm from PS pump out to the accumulator side 18mm high pressure port.
2) Then 16mm out of the other side of hydroboost to a 18mm port on the steering R&P.
**LOW**
Final line is a low pressure/return from both the hydroboost spitter port as well as the smaller 16mm port on the R&P .... teed back into the return on PS pump.
So like this.
