|
Re: 01 8.1 dreaded oil pressure sensor
When I had to replace the one on the 6.0L in my '06 Silverado, I had to use 2 extensions and a wobble with a special socket on my 3/8" ratchet to remove and replace the sending unit. i used some masking tape to hold the new sending unit in the socket and CAREFULLY threaded it into the hole (there was no way in hell I was getting my paw in there). I also set up 2 different mirrors at different angles so I could see what the heck I was doing.
I'm half bear as well...
Gary
__________________
'cuz chicks dig scars...
My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread.
The Rebuild of Creeping Death after the wreck
Quote:
Originally Posted by LONGHAIR
I would never rebuild a 305.
|
Quote:
Originally Posted by prostreetC-10
I love using vacuum gauges as part of the carb tuning process. I hook the gauge to the inside of my garbage can and leave it there.
|
Quote:
Originally Posted by Marv D
Remember Murphys 2nd law of mechanical relationships... "OPPOSING COMPONENTS ATTEMPTING TO OCCUPY THE SAME SPACE, AT THE SAME TIME, GENERALLY END UP OCCUPYING ADJOINING SPACE AT THE BOTTOM OF THE OIL PAN"
|
Quote:
Originally Posted by cableguy0
Its cheaper to listen to advice given when you ask for help than it is to ignore everyone and wait for carnage.
|
|