[70STOVEBOLT]

Hard to see the hangers but they are attached to the crossmember just behind the mufflers. I also used the stainless straps that I cut off and attached them to the trailing arm crossmember, but I don’t have pics of that. I also have my exhaust tucked between the frame rails. The tail pipes are attached to the stock hanger behind the rear wheels. I used the factory hanger on the driver’s side that is riveted to the frame and made a mirror image of it and bolted it to the frame on the passenger side. The Pypes kit is for a long bed so you will need to cut some of the pipes to fit the SWB. Hope this helps. If I find more pics I will post them.