The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Bushman66 · 11-04-2019, 02:52 PM

Get the proper tool, it's about $20. Spin it with an electric drill. I wouldnt crank the engine at all until you are ready to fire it. The pump will fill all the passages with oil. Spin it until all the rockers have oil running through them.

11-04-2019, 02:52 PM	#7
Bushman66 Registered User Join Date: Apr 2019 Location: Phx, Arizona Posts: 131	Re: ALMOST ready to fire it up Get the proper tool, it's about $20. Spin it with an electric drill. I wouldnt crank the engine at all until you are ready to fire it. The pump will fill all the passages with oil. Spin it until all the rockers have oil running through them. Last edited by Bushman66; 11-04-2019 at 05:26 PM.