|
Re: ALMOST ready to fire it up
Quote:
Originally Posted by Bushman66
Get the proper tool, it's about $20. Spin it with an electric drill. I wouldnt crank the engine at all until you are ready to fire it. The pump will fill all the passages with oil. Spin it until all the rockers have oil cing through them.
|
I will happily pay $20 to do it right, but this is what the top of my oil pump looks like, w/ the slot style shaft which engages the dizzy. Do you happen to know if the generic tool I can buy at an auto parts store fit this style?
__________________
1965 GMC 1000 SWB Fleetside L6 230 - SOLD
Thanks everyone for the help over the years.
|