The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TheMattMan · 06-05-2002, 02:49 AM

I talked to some techs (and u guys are pretty convincing <g>) And they can set me up with a set of Vortecs with a upgrade kit with a max lift of .55 for $317 each and Edelbrock Vortec performer Intake for $158. So I should be able to get some forged flat top pistons and end up with a high 9 or low 10:1 CR. Seems to me this would be a pretty decent setup.

Thanks for the replys, U all have been really helpful...I am sure I will have many questions to come.

TheMattMan

06-05-2002, 02:49 AM	#12
TheMattMan Registered User Join Date: Apr 2002 Location: Lumberton, TX , USA Posts: 71	I talked to some techs (and u guys are pretty convincing <g>) And they can set me up with a set of Vortecs with a upgrade kit with a max lift of .55 for $317 each and Edelbrock Vortec performer Intake for $158. So I should be able to get some forged flat top pistons and end up with a high 9 or low 10:1 CR. Seems to me this would be a pretty decent setup. Thanks for the replys, U all have been really helpful...I am sure I will have many questions to come. TheMattMan