The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**WorkinLonghorn** · 12-03-2019, 11:14 AM

OK thanks guys. He says he has one coming in from a friend that might work.
I'm glad at this point that it is him doing this and not me working on my slanted driveway. He is putting an engine into the truck which has the transmission in place. So he has to have it aligned and I guess he has to be really slow and careful. It did come with a pilot bearing.

12-03-2019, 11:14 AM	#10
WorkinLonghorn Senior Member Join Date: Dec 2006 Location: Studio City, Calif. Posts: 2,887	Re: Clutch Alignment tool; Where to find. OK thanks guys. He says he has one coming in from a friend that might work. I'm glad at this point that it is him doing this and not me working on my slanted driveway. He is putting an engine into the truck which has the transmission in place. So he has to have it aligned and I guess he has to be really slow and careful. It did come with a pilot bearing. __________________ '69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme.