Quote:
Originally Posted by Andy4639
On my 3 speed wiring harness there is one large purple wire that goes from the fuse block to the ignition switch. Then the other smaller purple wire goes to the lights.
I want to know where to cut the large wire to add the NSS into the system.So your saying it goes straight to the NSS switch then into the under dash harness if I'm reading your statement correctly...right.
|
Yes, from the ign switch to the NSS and from the NSS to the bulkhead connector. If you check the engine side of that connector there should be a large (12ga) purple wire in that same location and it should go to the starter solenoid.
LockDoc