The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 12-07-2019, 12:16 PM

So I cut about the purple wire coming out of the fuse block about 12" away and put a spade connector on it. I then added 12" of wire back to the other side and put a butt connector and spade on it to hook to the NSS. I hope it's enough. It's basically the same length as the reverse light pig tail in the harness so hopefully it's long enough.

12-07-2019, 12:16 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: NSS in auto So I cut about the purple wire coming out of the fuse block about 12" away and put a spade connector on it. I then added 12" of wire back to the other side and put a butt connector and spade on it to hook to the NSS. I hope it's enough. It's basically the same length as the reverse light pig tail in the harness so hopefully it's long enough. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.