The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

KMC3420 · 12-08-2019, 01:16 PM

I am in the process of converting my 68 to disc brake/drop spindles. I just want to clarify on the front inner wheel seal. I am seeing two different styles, one with a lip and one without a lip around the outer edge. I am 99% sure it’s the seal with the lip around the outer edge I need, like in the first picture. Also, I assume I need to put a bit of oil on the seal upon installing the rotor on the spindle. Below are the seals I’m seeing from rockauto. For the the ECE drop spindles I have I was told to use parts for a 71-72 c10, which are the seals listed below. Thanks.

12-08-2019, 01:16 PM	#1
KMC3420 Registered User Join Date: Dec 2012 Location: Harrison, AR Posts: 1,073	Front inner wheel seal I am in the process of converting my 68 to disc brake/drop spindles. I just want to clarify on the front inner wheel seal. I am seeing two different styles, one with a lip and one without a lip around the outer edge. I am 99% sure it’s the seal with the lip around the outer edge I need, like in the first picture. Also, I assume I need to put a bit of oil on the seal upon installing the rotor on the spindle. Below are the seals I’m seeing from rockauto. For the the ECE drop spindles I have I was told to use parts for a 71-72 c10, which are the seals listed below. Thanks. Attached Images __________________ Keagan 68 SWB C-10 original 350 A/C 503 Mean Green Last edited by KMC3420; 12-09-2019 at 12:09 AM.