12-13-2019, 06:28 PM
|
#4
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Quick HEI wiring question
Quote:
Originally Posted by Bushman66
Thanks. OK, from reading this it says the yellow wire CAN be removed, but it doesn't hurt anything to leave it in place, since I'm pulling 12V from the fuse panel, correct?
|
Correct. It want hurt a thing as long as it doesn't make contact with metal. You need to either cut the ends off and tape are make sure you tape up the connectors good. I always just clip the wires you want never go back to the old style after driving it. Plus it cleans up the harness nicely to.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|
|
|