The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 60-66 Lower Ball Joint Nut Size?

**PGSigns** · 12-17-2019, 07:26 AM

Just use a tape measure. I think you need a 1" wrench. When you go get a new wrench get a cheap set of calipers to keep in your tool box. Also if you don't have one pick up a 3 pound ball peen hammer. You will need it to break the taper loos on the ball joint. You can get all this at a Harbor freight and save some money with a coupon.
Jimmy

12-17-2019, 07:26 AM	#3
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: 60-66 Lower Ball Joint Nut Size? Just use a tape measure. I think you need a 1" wrench. When you go get a new wrench get a cheap set of calipers to keep in your tool box. Also if you don't have one pick up a 3 pound ball peen hammer. You will need it to break the taper loos on the ball joint. You can get all this at a Harbor freight and save some money with a coupon. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic