Quote:
Originally Posted by mongocanfly
Im not sure how the gen4 engine es are, but You don't need any wiring harness for a nv4500...any of the psi harness for a manual will work...but wait till you get a engine before you buy a harness...then call psi or whoever and tell them what your doing...they will tell you what you need..
The only issue you'll have is converting the pulse speedo to a cable drive...Dakota digital makes a box that does that...
Transfer cases from the 90s are driver side drop...you need pass side drop...the only one I'm aware of in the 90s was a np241 in the 3/4t suburbans 90-91
|
Awesome! I really appreciate all the help! A guy I know has an LY6 I’ve been looking at... I will probably pull the trigger on it this week! Has 96k on it!