The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What did you get done this weekend 1/2/2020 edition

Installed my newly painted tailgate and test-fitted a tailgate cap. I'm having problems linking to Google Photos. Can you guys see the picture below?

https://lh3.googleusercontent.com/zf...=w1273-h955-no

__________________
Mike
1969 Custom/10 LWB -- owned for 37 years. 350/TH350, 3.08 posi, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. Hedman stainless headers. Old Air installation in progress.
1982 Custom Deluxe 10 SWB -- converted from 250-six to roller cam 350 w/ Vortec heads -- sold
1981 C10 Silverado LWB, 305, TH350C -- sold, but wish I still had it!
1969 C10 (not the current one) which I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming.
Retired as a factory automation products salesman.
Worked part-time over the years for an engine builder and a classic car repair shop.
Member here for 26 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

01-21-2020, 01:30 PM	#4
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 4,036	Re: What did you get done this weekend 1/2/2020 edition Installed my newly painted tailgate and test-fitted a tailgate cap. I'm having problems linking to Google Photos. Can you guys see the picture below? https://lh3.googleusercontent.com/zf...=w1273-h955-no __________________ Mike 1969 Custom/10 LWB -- owned for 37 years. 350/TH350, 3.08 posi, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. Hedman stainless headers. Old Air installation in progress. 1982 Custom Deluxe 10 SWB -- converted from 250-six to roller cam 350 w/ Vortec heads -- sold 1981 C10 Silverado LWB, 305, TH350C -- sold, but wish I still had it! 1969 C10 (not the current one) which I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 26 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! Last edited by MikeB; 01-22-2020 at 01:06 PM.