The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

LS short box · 02-01-2020, 06:01 PM

Tuff to put a accurate cost on the swap but there are things you can do reduce the cost. Use truck front accessories and intake. Rework the engine harness your self. The older 24 tooth reluctor 5.3's like before 2006 only need one computer to run the engine and a 4L60E if that's the route you are going. Adjustable motor mounts are about $100? Trans cross member can easily be made out of piece of tubing.

02-01-2020, 06:01 PM	#2
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 2,217	Re: LS cost Tuff to put a accurate cost on the swap but there are things you can do reduce the cost. Use truck front accessories and intake. Rework the engine harness your self. The older 24 tooth reluctor 5.3's like before 2006 only need one computer to run the engine and a 4L60E if that's the route you are going. Adjustable motor mounts are about $100? Trans cross member can easily be made out of piece of tubing.