The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

LS short box · 02-01-2020, 06:06 PM

I did something similar using two pieces of exhaust tubing welded to a flat plate with a small extension with a hole drilled in it so I could slip it under the trim ring of the shifter and hole it in place with one of the trim screws.

02-01-2020, 06:06 PM	#5
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 2,215	Re: Cup Holder I did something similar using two pieces of exhaust tubing welded to a flat plate with a small extension with a hole drilled in it so I could slip it under the trim ring of the shifter and hole it in place with one of the trim screws.