[nsb29]

According to my wiring diagram you have one of those orange wires coming from your fuse panel and going to the brake light switch the other orange wire comes off of your brake light switch and goes to your glove box lamp and accessory connection the other side of the brake light switch you have a blue wire that goes to your third brake the other wire is white and it goes to your steering column which is for your brake light As far as your switch is concerned not knowing exactly which which you have as mine the ones closest to the button are for the brakes the two rear ones are for transmission and cruise control they have to have a separate power feed that is switched if you are unsure you can use an ohmmeter and operate to switch to figure out what you have the one for the brake lights should only have continuity when the plunger is extended I assume you are running the wires for your transmission or was this dun by AAW hope this works for you Did yours come with a diagram like this I am sending it into pieces as it is too long to get in one picture