|
Re: under bed tank
slow progress. i ordered a different filler neck to get it coming straight up. i will then try to raise it an inch if can.
now i need to decide on fuel lines. input would be gladly taken. i have an old 283. so no electric pump, the tank has a sump so fuel injection is possible in the future.
the pick up tube bolts in where a fuel pump would g. it has 3 outlets
one to be used as a suction line to inline pump or block pump.
another to be used as a return.
the third has a bab end and is intended to be used for the included rolover valve/vent.
i am thinking running flare line 3/8 from both feed and return to a bulkhed at front of tank the return plugged off. and the vent run to same bracket and up as high as possible.
any advice on a preferred "not plastic" fuel filter. maybe mounted right there at front of tank. then what line from there to existing hard fuel line to fuel pump.
i am open to criticism advice suggestions and photos of yours
my goal is to do it once.. without costing too much. i want the tank easily removable.
thanks for your time
Marty
|