The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Gregski** · 02-19-2020, 09:55 PM

Volumetric Efficiency VE Table Calibration

again this should only change the cells that had corrections in them (screen shot below)

of course you want to hit as many cells during your test drive as you can, but we just went around the block to see how bad things are, after these test drives you can head out on a 20 - 30 minute ones

keep in mind you will never hit all the cells, so don't die trying

so as before save this file with a new name, something like 03 - VE Calibration - Multiply By Percent Half.hpt and write / Flash the changes to the PCM

02-19-2020, 09:55 PM	#277
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,810	Re: HP Tuners Tutorials - Volumetric Efficiency VE Table Calibration Volumetric Efficiency VE Table Calibration again this should only change the cells that had corrections in them (screen shot below) of course you want to hit as many cells during your test drive as you can, but we just went around the block to see how bad things are, after these test drives you can head out on a 20 - 30 minute ones keep in mind you will never hit all the cells, so don't die trying so as before save this file with a new name, something like 03 - VE Calibration - Multiply By Percent Half.hpt and write / Flash the changes to the PCM Attached Images Last edited by Gregski; 02-19-2020 at 10:04 PM.