Timing
So after you have your Channels and your Graph all setup, you can go for a test drive and record/log some data. You do not need to write/Flash anything from the VCM Editor to do this.
Here is a look at some of my numbers.
I highlighted a cell at 1400 RPM and 0.28 grams with a value of
26 degrees advance to show you that it does not match either of my High Octane or Low Octane Tables. You may find yourself in a similar situation. So what gives?
So far this is what I wanted you to discover.
1. Where your timing settings come from (High and Low Octane tables), aka what they should be.
2. And what they actually are, aka the new Histogram / graph we just populated with data.
So we may not have all the answers but we at least now realize that there may be a discrepancy.