The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Old 3-Speed to Muncie 4-speed conversion questions

88Stanger · 03-04-2020, 10:19 AM

Everyone, thanks so much for all the replies. In my own ignorance, i decided to stop and just take a breath, read carefully what has been said here and other places and look at a hydraulic throwout bearing setup. After a short time i began to realize that it is very simple to convert to hydraulic system, Captainfab sells a fantastic kit (which I am buying) and Speedway sells the throwout bearing and lines needed. Yes it will cost around $400.00 to do the full conversion, but the simplicity is outweighing the costs. So i believe i have fixed my issue here.

03-04-2020, 10:19 AM	#5
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,656	Re: Old 3-Speed to Muncie 4-speed conversion questions Everyone, thanks so much for all the replies. In my own ignorance, i decided to stop and just take a breath, read carefully what has been said here and other places and look at a hydraulic throwout bearing setup. After a short time i began to realize that it is very simple to convert to hydraulic system, Captainfab sells a fantastic kit (which I am buying) and Speedway sells the throwout bearing and lines needed. Yes it will cost around $400.00 to do the full conversion, but the simplicity is outweighing the costs. So i believe i have fixed my issue here.