The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dunce79 · 03-11-2020, 04:08 PM

Time for an update : ) Getting to more of the fun stuff now.

CPP Hydroboost brakes
Scotts Hotrods IFS
Fitting the LS3
Slight dash mod/fix for the radio/heater controls etc
Gauge cluster
Step notch out back with Quick performance 9 inch, 3.90 gears and disc brakes
I have the original deluxe out wheel out for restore, just using an old 66 Nova wheel as a standin
core support mockup, 69 camaro radiator, homebuilt shroud with dual 11 inch SPAL fans
Made some 6x9 rear speaker sections and a place to mount the amp and PCM
Test fit the vintage air AC unit
Detroit Steel Del rays in bare steel... have some trim rings and chevy caps coming
315/30/20 rear tires and 255/30/20 up front - have room to go wider though.
Doug Thorley tri Y headers fit this application near perfectly.
Made some kick panels and put 5x7s where the vents used to be.

03-11-2020, 04:08 PM	#34
dunce79 Registered User Join Date: Sep 2014 Location: Fremont, NE Posts: 154	Re: Dunce's 61 SWB Custom Time for an update : ) Getting to more of the fun stuff now. CPP Hydroboost brakes Scotts Hotrods IFS Fitting the LS3 Slight dash mod/fix for the radio/heater controls etc Gauge cluster Step notch out back with Quick performance 9 inch, 3.90 gears and disc brakes I have the original deluxe out wheel out for restore, just using an old 66 Nova wheel as a standin core support mockup, 69 camaro radiator, homebuilt shroud with dual 11 inch SPAL fans Made some 6x9 rear speaker sections and a place to mount the amp and PCM Test fit the vintage air AC unit Detroit Steel Del rays in bare steel... have some trim rings and chevy caps coming 315/30/20 rear tires and 255/30/20 up front - have room to go wider though. Doug Thorley tri Y headers fit this application near perfectly. Made some kick panels and put 5x7s where the vents used to be.