Re: HP Tuners Tutorials - Idle Tuning
Idle Tuning - Base Timing
notice on this next bump I expanded the highlighted area to the right to include the 800 RPM range, that's because the PCM uses the surrounding cells to average out the timing, and I wanted to be sure this time we were at 23°
hey lookie there, the kPa has budget, now keep in mind these numbers fluctuate so my initial was sometimes reading 37 and sometimes 38, so now that I see 37 that means we are moving in the right direction, and this could very well be a 36 sometimes as well, etc.
Last edited by Gregski; 03-15-2020 at 03:08 PM.
|