|
Re: '86-'13 swap questions
not many people use the factory fuse box, so that right there is going to limit 98% of the people here who have done these swaps.
so.. its just like any other swap. identify one wire at a time, ohm test it with a multi meter to verify if its your 1st time, rinse and repeat so you 1, know and 2 make minimal mistakes if any.
make a new fuse box with whatever you can afford. cheap ebay 30$ fuse box that some have used, or research other fuse boxes thats higher quality and uses quality seals and terminals.
ls swap needs minimum
battery constant power to the fuse box
ignition power
starter
fuel pump relay
everything else is strait up wiring diagram.
clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|