[lks dcvn]

I have one concern for the rear quarters - and that is the B-pillar/lower quarter body line.

The OEM panels are parallel with the rocker. On some of the aftermarket quarters - the b-pillar area slopes upward and is not parallel to the ground. This is not consistent for all panels though.

Added photos for reference: One with highlighting - one without)

Note the lower metal path is all aligned between front fender, outer rocker and the front part of the quarter. In some cases the front part of the quarter (red boxed area) angles upward. If you take an L-Square and lay it across the gap from rocker to rear quarter - this will be evident.