The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

tim_mc · 04-30-2020, 10:23 AM

My mirror is loose, but it's at the cam that swings the mirror up or down for night driving. I fiddled with it and think I was able to tighten it up by using a small drift/punch to carefully pry the case out around the slotted opening for the lever. I started on the edge closed to the mirror, then worked my way around to the outside so that I could use the edge of the mirror for leverage.

04-30-2020, 10:23 AM	#17
tim_mc Registered User Join Date: Jan 2019 Location: St Peters, MO Posts: 461	Re: Loose Rear View Mirror My mirror is loose, but it's at the cam that swings the mirror up or down for night driving. I fiddled with it and think I was able to tighten it up by using a small drift/punch to carefully pry the case out around the slotted opening for the lever. I started on the edge closed to the mirror, then worked my way around to the outside so that I could use the edge of the mirror for leverage. Attached Images __________________ 1967 C20, 350 SBC w/Comp roller cam, 700R4 w/3.42 posi, PS, 4-wheel PDB, Old Air AC & GM Tilt column.