I got some heavy cad plated flatwashers from a local surplus store(3/16 thick by 2 1/2"? ) . I would need to measure to be sure on size. at any rate, i used a couple washers on top of the front cab mounts, & cut some lenghts of pipe for a sleeve inside the bushings, to give a stop when torked up. the rears had new bolts, but the fronts did not(lucky she was a so cal truck). crazyL 
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
|