The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68xxx · 06-24-2004, 01:28 AM

Thanks for the replies guys,

I am still learning about this truck myself as I cannot claim responsability for its mods and resto so I can't tell you too much.

I beleive it to be around a 4/6" drop with drop spindles up front and some big blocks at rear but as I haven't actualy seen what the stock set-up looks like so it is hard for me to be sure.

Wheels are 17" TT 2's and I will check the rubber size and backspace soon.
Tires do scrub a touch but only in severe cases of bottoming out.

It handles pretty good considering it doesn't even have a front sway bar.

Thanks again for the replies, Mark.

06-24-2004, 01:28 AM	#4
68xxx Registered User Join Date: Jun 2004 Location: Gold Coast, East Coast of Australia Posts: 39	Thanks for the replies guys, I am still learning about this truck myself as I cannot claim responsability for its mods and resto so I can't tell you too much. I beleive it to be around a 4/6" drop with drop spindles up front and some big blocks at rear but as I haven't actualy seen what the stock set-up looks like so it is hard for me to be sure. Wheels are 17" TT 2's and I will check the rubber size and backspace soon. Tires do scrub a touch but only in severe cases of bottoming out. It handles pretty good considering it doesn't even have a front sway bar. Thanks again for the replies, Mark.