The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Russell · 06-24-2004, 01:46 AM

Anyone know of anything you can use to buff out welding spots? I was fixing holes in the roof of my 80 with some fluxcore (read splattery) wire in my MiG, and of course I started on the drivers side (I later bought a gas bottle and switched to a solid core wire) and wherever a splatter landed it melted a bit of glass away and left a small pit, and being flux core, its a LOT of little pits in my windsheild. I can still see out of it, but my wiper is useless now, and I get a lot more glare at night.

06-24-2004, 01:46 AM	#30
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Anyone know of anything you can use to buff out welding spots? I was fixing holes in the roof of my 80 with some fluxcore (read splattery) wire in my MiG, and of course I started on the drivers side (I later bought a gas bottle and switched to a solid core wire) and wherever a splatter landed it melted a bit of glass away and left a small pit, and being flux core, its a LOT of little pits in my windsheild. I can still see out of it, but my wiper is useless now, and I get a lot more glare at night. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)