The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**jaros44sr** · 05-07-2020, 10:18 AM

exhaust on the cheap

went on NAPA's catalog, came up with an assortment of hangers and clamps, had to modify some of the hangers. Then had to drill a rivet, as it was in the exact place where I wanted to mount the hanger, my least favorite thing to do, after about 2 hours of stepping the drill size up and 2 batteries, worked out.

[url=https://flic.kr/p/2iYuS8X]20200507_085353

[url=https://flic.kr/p/2iYuRpn]20200507_085308

took my old 1 1/2" pipes to a shop and used them as a template, nothing fancy, no mandrel bend

turn downs had to be adapted for now, later will have the exhaust bent over axle

05-07-2020, 10:18 AM	#3232
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,856	Re: PO has me PO'd exhaust on the cheap went on NAPA's catalog, came up with an assortment of hangers and clamps, had to modify some of the hangers. Then had to drill a rivet, as it was in the exact place where I wanted to mount the hanger, my least favorite thing to do, after about 2 hours of stepping the drill size up and 2 batteries, worked out. [url=https://flic.kr/p/2iYuS8X]20200507_085353[url=https://flic.kr/p/2iYuRpn]20200507_085308 took my old 1 1/2" pipes to a shop and used them as a template, nothing fancy, no mandrel bend turn downs had to be adapted for now, later will have the exhaust bent over axle __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 05-07-2020 at 10:28 AM.