|
Re: Floor starters
I'd have to ask why. The regular AD truck stomp pedal setup is mechanical linkage connected to the starter and not practical for a later truck.
You can rig a tractor foot starter button to work and adapt the stomp pedal pad on top without a lot of trouble Those can be had at Tractor Supply or most farm equipment dealers and then just hook the start wire to the solenoid to it rather than a push button on the dash.
https://www.tractorsupply.com/tsc/pr...-switch-dr405c
Still a rather lame cry for attention in a 60's truck that doesn't serve any real purpose. Doing it in and AD truck that had a stomp pedal and was converted to a V8 or later six that only has a solenoid starter and can't use the regular linkage is a simple way to put a starter button in those rigs.
__________________
Founding member of the too many projects, too little time and money club.
My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
|