|
Re: Outer Tie Rod ends to use on Camaro Spindles-Drill Out or Ball Joint
The hole in the Camaro steering arm should have a ten degree taper.
From what I can find is that the MII has a 7 degree taper.
Mean while a pair of these should solve your current problem if the shank diameter fits your heim ends. https://www.speedwaymotors.com/Adjus...Heim,3333.html
A pairs of those will get you going along with the over size retainer washers to keep the joint from coming apart. Like these. https://www.pegasusautoracing.com/pr...p?Product=3068
Photo in this link shows why you need and want them. https://www.pacificcustoms.com/fk-he...ywasher10.html
__________________
Founding member of the too many projects, too little time and money club.
My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
|