Re: Outer Tie Rod ends to use on Camaro Spindles-Drill Out or Ball Joint
Those have a 7 Degree taper = Ford taper and won't work with those spindles that have a 10 degree taper.
Also the 1/2 diameter is a bit skimpy.
Somewhere you would think that someone has tie rod ends with a 10 degree taper that also match S =10 for putting a Ford rack on an S-10 chassis.
__________________
Founding member of the too many projects, too little time and money club.
My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
Last edited by mr48chev; 05-28-2020 at 02:42 PM.
|