Quote:
Originally Posted by Captainfab
The '63-'66 C20's & C30's have a flat lower control arm shaft. Consequently there are no saddles to accept a C10 round lower control arm shaft. I have heard that there is a special spindle for the C20 to C10 conversion, but I can not verify that nor do I know who supposedly makes one. Personally I would just change the entire suspension crossmember and all for one out of a '73-'87 C10.
|
If that is the case I can prob put the later ball joint in the stock lower control arm. The uppers are the same except the ball joint, so prob use them. Just need spindles I guess.
I saw CPP makes swap spindles, but trying to keep costs low.
Thanks for the info!