|
Re: Body Leak
Hello: RyanAK
Most likely rusted out window channel or cowl leaking in the vent area, or pillar.
As said you should pop out the windshield and the seal check the metal around the rubber seal and the rubber seal and the cowl vent air channel ( wipers arms) rot. 73-87. Hinge rubber seal 81-87 left and right.
Window seal might be ok unless it cracked it most like pop out of place because of rust pushing on it letting water between the glass rubber or the rubber just needs pulled re-fitted in some cases. ( if not to stiff, ripped bent from rust pushing for a long time shape will not come back.
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|