I checked the pinionangle yesterday, and it's defenetely off...
Thanks to lolife99 for mentioning it. It would be a pain to redo when I welded it all the way. For now its all just tacked together, so it's not too bad to fix.
But for now an update...
Front suspention.
I cut out the rough shape for the top bagmount plates.
Cut out some circles:
After rolling some 40mm flat steel and tacking it together we end up with this
Cut some big holes in the lower control arms:
and tacked the cups in
Time for a test fit
Test fit with the bag
Looks good, welded it solid.
Mounted the spindel and drilled a hole for the airline to the bag.
wheels on and take a look at roughly ride hight
That is it for now again. Next update tomorrow 'ish'