- Update -
The pulley I designed is done, and looks awesome
But i messed up on the measuring side of things.
So I needed to make a spacer for it.
Made this from aluminium with the necessary centering rings
After this I also needed to make a spacer for the waterpump pulley.
Next up the oil feed for the compressor.
Screwed a 1/8 Npt to 1/4 Bsp Nippel into the oil hole in the front of the engine.
1/8 NPT is not a common size over here. 1/4 BSP can be bougth at every hydraulic shop in the area.
Then I made a oil line from this nipple to a banjo bolt on the compressor.
I still need to press the sleeves on the ends of the oil line.
Got a belt that fits on the compressor
looks good to me
Getting closer to be able to do a testrun
