|
Re: 1968 Engine Frame Pad location?
Talking to my late cousin about his 69 with 396 build a while ago he used the back set of holes with the high hump
The reason he used the back hole position was to make room for the headers
Yes 4x4s use the back set of holes as well i have seen a few trucks with a 396 in the 4x4 stock location
V8 and 250 six bangers use the same stands the 292 use an offset set of stands on one side
I am planing on my build of my 68 using the back holes with my 350 as i am also changing transmissions and will need to shorten my drive shaft any way
Last edited by gmc684x4; 08-19-2020 at 09:32 PM.
|