The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 83 C30 2wd Heavy Duty vs Non-Heavy Duty Front Suspension?

EricU · 08-31-2020, 06:26 PM

Went and checked my truck. It has the U-bolts for the lower control arms, so it is the standard duty 1-ton (non Heavy Duty)

Took awhile as parts stores don't answer the phones around here due to the world shutting down, so I found an online (eBay) retailer.

What I ordered is listed here all Moog except the Pitman arm;

RK622888 Front Left Upper - Control Arm and Ball Joint Assembly
RK622887 Front Right Upper - Control Arm and Ball Joint Assembly
RK620036 Front Left Lower- Control Arm and Ball Joint Assembly
RK620037 Front Right Lower - Control Arm and Ball Joint Assembly

ES409LT Tie Rod End (needs 2) Inner
ES409RT Tie Rod End (needs 2) Outer
ES2004S Tie Rod End Adjusting Sleeve (req 2)

K6247T Idler Arm (1)

K6142 Pitman Arm (1) - Replaced with Mevtech

08-31-2020, 06:26 PM	#3
EricU Registered User Join Date: Jan 2013 Location: Napa, CA Posts: 242	Re: 83 C30 2wd Heavy Duty vs Non-Heavy Duty Front Suspension? Went and checked my truck. It has the U-bolts for the lower control arms, so it is the standard duty 1-ton (non Heavy Duty) Took awhile as parts stores don't answer the phones around here due to the world shutting down, so I found an online (eBay) retailer. What I ordered is listed here all Moog except the Pitman arm; RK622888 Front Left Upper - Control Arm and Ball Joint Assembly RK622887 Front Right Upper - Control Arm and Ball Joint Assembly RK620036 Front Left Lower- Control Arm and Ball Joint Assembly RK620037 Front Right Lower - Control Arm and Ball Joint Assembly ES409LT Tie Rod End (needs 2) Inner ES409RT Tie Rod End (needs 2) Outer ES2004S Tie Rod End Adjusting Sleeve (req 2) K6247T Idler Arm (1) K6142 Pitman Arm (1) - Replaced with Mevtech __________________ Sent by the random thoughts from the voices in my head...