Hi Southern Parts,
In case you don't find what you are looking for on here, I made a contact out here on the west coast that does really good work and very economical from other places. In my situation, I installed a set of El Dorado brakes for the rear conversion but the ebrake cables were about 8" inches too short. I called one place back east and they wanted $80.00 a cable.... I then got ahold of Vic Mark at Control Cables in Los Angeles and got both at 60" inches for less than $100 with shipping included.. Mine were custom but he may haves yours in stock... Just a thought.
Vic
Control Cables Inc.
9816 Alburtis Ave.
Santa Fe Springs, CA 90670
(562)949-0455
(562)949-0595 FAX
Quote:
Originally Posted by southern parts
looking for both rear parking brake cables for a 68 4x4 burb. they should measure approx 4ft. overall with about 2ft 9in. between the backing plate and the where the clip fastens them at the front.
|
__________________
********************************************
In-work on my 5.3L/4L65E/NP208 case conversion into a 1972 GMC JImmy 4x4... Not as simple as it looks folks..
