[72MARIO]

Just wanted to let you know how I did my fan setup using 1 fan but 2 controls. I used the green ac clutch power wire to control the trigger wire for fan 1 relay . Fan 1 was set on at 80f off at 280. Basically fan 1 is alway on using the pcm ground trigger. I set my fan 2 to come on at 205 off at 195. I just tied both the 10 gauge wires for the fan power together.
Both are set.to turn off at 30 mph. Works perfectly as long as you set fan 1 to be on constant.

I didnt want any more switches and wanted the ac fan off at road speed.