The I 6 & the sb use the same eng mounts( same pn). The stands are different, as far as placement front to rear on the eng, but the sb will mount on the i 6 stands. if you are running a stick, with the bell crossmember, i would use the i 6 stands.....to swap to the sb stands, you will also need to swap the bell crossmember. good luck,crazyL 
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
|