View Single Post
Old 10-22-2020, 09:42 AM   #2
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 26,085
Re: Fragola Push-lite system

Quote:
Originally Posted by lutronjim View Post
I am wanting to run some radiator/tranny cooler lines that will be simple to disconnect - not looks. This system is a lot more reasonable that most others I have looked at.

Its rated up to 250psi and up to 300f well within what the tranny will put out.

I'm about convinced that most ls conversion radiators have problems - just pick one and search on it. I am about to try my 3rd radiator and need to replace or 'extend' the existing barb rubber hoses which are leaking. Tight clamps and heat make the hose just about impossible to remove without destroying the ends.

Anyone have any experience with this system?

Thanks

No experience but I had to look it up to see what it was. I checked out Summits page on it. Looks pretty bullet proof to me.

https://www.summitracing.com/search/...+D+-+L+(Search)

On another note, I used my stock radiator when I put the LS1/4l60e in my '67 Panel Truck and have had no issues with it. The radiator I had, had a heater hose outlet on it, up towards the top and I connected the LS steam port hose to that.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote