The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Squarebody Dash Repair -1st attempt

EricU · 11-10-2020, 04:18 PM

This is my first attempt at a Squarebody dash repair. After doing the usual “research” on different websites and University of Youtube, this is what I came up with.

The materials that I used were:
Canned spray foam
Hardware store mesh
TotalBoat’s FlexEpox (flexible epoxy) after seeing another post
Upol 7061 Flexible High Density Body Filler (Flexible Bumper Filler)
Upol Raptor liner

I pulled this dash out of a Suburban parts rig that I bought a while back. Pretty typical cracked dash, not as bad as some that I have seen.

Since this dash is going into a C30 dually that I am going to sell (I really don’t need two of them) I decided just to do away with the speaker cut outs. I also V-grooved out the various cracks

11-10-2020, 04:18 PM	#1
EricU Registered User Join Date: Jan 2013 Location: Napa, CA Posts: 242	Squarebody Dash Repair -1st attempt This is my first attempt at a Squarebody dash repair. After doing the usual “research” on different websites and University of Youtube, this is what I came up with. The materials that I used were: Canned spray foam Hardware store mesh TotalBoat’s FlexEpox (flexible epoxy) after seeing another post Upol 7061 Flexible High Density Body Filler (Flexible Bumper Filler) Upol Raptor liner I pulled this dash out of a Suburban parts rig that I bought a while back. Pretty typical cracked dash, not as bad as some that I have seen. Since this dash is going into a C30 dually that I am going to sell (I really don’t need two of them) I decided just to do away with the speaker cut outs. I also V-grooved out the various cracks Attached Images __________________ Sent by the random thoughts from the voices in my head...