The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Clyde65** · 11-22-2020, 06:16 PM

Front cradle is bolted in,, lower a-arms are in place, rear shocks and rear brake lines replaced.
I had a BTR stage II cam put in the 5.3, trans freshend up too.

I will start the front brakes and all next weekend. Finally got the parts I needed.
Will also drop the stock tank for the new CPP FI tank when it gets here.
Stripped the seats and will send out to blast and paint. Going with gloss fawn on the seats and eventually semi gloss fawn on the interior.
Posted via Mobile Device

11-22-2020, 06:16 PM	#13
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: New project 65 GMC Front cradle is bolted in,, lower a-arms are in place, rear shocks and rear brake lines replaced. I had a BTR stage II cam put in the 5.3, trans freshend up too. I will start the front brakes and all next weekend. Finally got the parts I needed. Will also drop the stock tank for the new CPP FI tank when it gets here. Stripped the seats and will send out to blast and paint. Going with gloss fawn on the seats and eventually semi gloss fawn on the interior. Posted via Mobile Device