|
Re: Flatout IFS install for maximum ride height
To mount the crossmember higher than factory, you will need to modify the frame to prevent the coilovers from touching the frame, probably modify the coilover mount itself, and maybe verify that the upper arm doesnt touch the frame when fully extended downwards.
If you already owned it, you could mount the suspension, jack up the crossmember until the LCA's are level with the ground, then jack up the frame until you reach the desired ride height to see how much lower you need to mount the crossmember.
Just make sure you don't get projectitis, cause you're the only guy on earth who wants a lifted C4 Chevy truck...so you better finish it!
|