The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

tim_mc · 12-02-2020, 11:15 AM

I've redone OEM bolts using the same method as 70STOVEBOLT with good results. If you have a bead blaster or wire wheel then this is a good option. I bought a pint of Caswell Black Oxide Concentrate and use WD40 as the sealer. Here's a good video from Cuda Cody on the process:
https://www.youtube.com/watch?v=7vTn6l5h67A

I've also bought replacement OE-style bolts in bulk at good prices.

12-02-2020, 11:15 AM	#9
tim_mc Registered User Join Date: Jan 2019 Location: St Peters, MO Posts: 461	Re: Black Oxide Bolts I've redone OEM bolts using the same method as 70STOVEBOLT with good results. If you have a bead blaster or wire wheel then this is a good option. I bought a pint of Caswell Black Oxide Concentrate and use WD40 as the sealer. Here's a good video from Cuda Cody on the process: https://www.youtube.com/watch?v=7vTn6l5h67A I've also bought replacement OE-style bolts in bulk at good prices. __________________ 1967 C20, 350 SBC w/Comp roller cam, 700R4 w/3.42 posi, PS, 4-wheel PDB, Old Air AC & GM Tilt column.